New Windows Painted and Stucco Patched, Santa Barbara

Santa Barbara

Finished rear elevation of a white stucco home, from the tile roof down to dark green French doors and the brick patio — New Windows Painted and Stucco Patched, Santa Barbara

Purple Painting painted the new windows on a Santa Barbara Spanish-style home, spraying them in a primer and two finish coats of green, patched the stucco left by the window installer, and repainted two stucco walls.

Type
Residential
Location
Santa Barbara, CA
Client
Homeowner
Completed
2026

New windows had been installed in a two-storey Spanish-style home in Santa Barbara, leaving gray stucco patches around the frames and old shutter and awning hardware on the walls. Our job was to bring the windows and the two walls around them back together.

We pressure washed both elevations, patched stucco cracks, holes and anchor points including the installer’s patches, removed the shutters, old awning hardware and wall hooks and patched the holes, and primed every patch with a masonry bonding primer. The stucco body and wood eaves then got one uniform finish coat, corner to corner. The new windows were scuff sanded, the glass masked, and each given one coat of gray tinted acrylic primer and two coats of exterior paint in a green to match the existing, sprayed for a smooth factory-style finish with the edges cut in by hand. No urethane or oil-based coatings were used on the windows, at the owner’s direction.

How we did it

  1. Pressure wash

    Both painted elevations were pressure washed to remove dust, spider webs and surface contaminants.

  2. Patch the stucco

    Cracks, holes and anchor points were patched, including the patches left by the window installer, and primed with a masonry bonding primer.

    New white window in a side wall with a gray stucco patch around the frame before painting — New Windows Painted and Stucco Patched, Santa Barbara
  3. Remove old hardware

    Shutters, old awning hardware and wall hooks were removed and the anchor holes patched.

  4. Paint the stucco and eaves

    After spot priming the patches, the stucco body and wood eaves got one uniform finish coat, corner to corner.

  5. Prime and spray the new windows

    The new windows were scuff sanded and masked, then given one coat of gray tinted acrylic primer and two coats of exterior acrylic, sprayed with the edges cut in by hand.

    Product Sherwin-Williams Emerald Exterior

    Finished upper facade of a white stucco home with newly painted dark green windows — New Windows Painted and Stucco Patched, Santa Barbara